hamadabanna
03-21-2006, 09:11 PM
معلشى يا جماعة اعذرونى لان الشرح بالانجليزى
بس ان شاء الله تجدوا الشرح سهل لان معظمه بالصور
كيف تعمل هذا الشكل الذهبى الاحترافى
PSP Gold
http://nansons-place.com/nontut/8doodles/golden/pspgold-sm.jpg
Step 1
Open a new image, any size is fine. You just need it to activate the menus.
Step 2
Go to Effects>3D Effects>Inner Bevel.
Find the Metallic Setting.
Click the icon to the left of the eyes to close the preview screens. http://nansons-place.com/nontut/8doodles/golden/gold-shot.jpg
Step 3
You need a screen shot of the dialog box.
On your Keyboard press Alt + PrtScn, that will send a copy of the dialog box to your clipboard.
Click Ok to close the dialog box.
Go to Edit>Paste>Paste as New Image. Your dialog box is now Image 2 on your workspace.
http://nansons-place.com/nontut/8doodles/golden/gold-shot2.jpg
Step 4
Go to Layers>Duplicate.
You'll be adding effects to "Copy of Background".
Go to Effects>3D Effects>Inner Bevel.
Apply the Metallic Bevel to your screen shot.
http://nansons-place.com/nontut/8doodles/golden/gold-bevel.jpg
( Shown at 50% )
Step 5
Go to Effects>Artistic Effects>Contours.
Use these settings.
http://nansons-place.com/nontut/8doodles/golden/gold-contours.jpg http://nansons-place.com/nontut/8doodles/golden/gold-contours2.jpg
( Shown at 50% )
Step 6
Go to Effects>Artistic Effects>Glowing Edges.
Use these settings.
http://nansons-place.com/nontut/8doodles/golden/gold-edges.jpg
http://nansons-place.com/nontut/8doodles/golden/gold-edges2.jpg
( Shown at 50% )
Step 7
Go to Effects>Artistic Effects>Chrome.
Use these settings.
http://nansons-place.com/nontut/8doodles/golden/gold-chrome.jpg http://nansons-place.com/nontut/8doodles/golden/gold-chrome2.jpg
( Shown at 50% )
Step 8
Go to Adjust>Color Balance>Black and White Points.
Find the preset Gold Tone. http://nansons-place.com/nontut/8doodles/golden/gold-points.jpg
Step 9
Open your Layer Palette.
Click the small arrow next to normal, go to "Multiply".
http://nansons-place.com/nontut/8doodles/golden/gold-blend.jpg
Step 10
Now it should look pretty good except for the very top. http://nansons-place.com/nontut/8doodles/golden/gold-blend2.jpg
Click on your selection tool.
http://nansons-place.com/nontut/8doodles/golden/select.jpg
Go to your Tool Options Palette.
Set it to Rectangle, Feather 1.
Make a selection over the top section.
http://nansons-place.com/nontut/8doodles/golden/select2.jpg
Change the Mode on the Tool Ribbon to Add.
Make another selection on the blue area below the bar.
http://nansons-place.com/nontut/8doodles/golden/select3.jpg
Note: Set the Mode back to "Replace" when you finish.
If you forget you won't be able to make a selection next time you try.
Step 11
Go to Selections>Promote Selection to Layer.
Go to Selections>Select None.
Go to Layers>Merge>Merge All.
Go to Adjust>Edges>Sharpen>Unsharp Mask.
Experiment with the settings.
This is what I used.
http://nansons-place.com/nontut/8doodles/golden/gold-sharp.jpg http://nansons-place.com/nontut/8doodles/golden/pspgold.jpg
That's it, you're done
بس ان شاء الله تجدوا الشرح سهل لان معظمه بالصور
كيف تعمل هذا الشكل الذهبى الاحترافى
PSP Gold
http://nansons-place.com/nontut/8doodles/golden/pspgold-sm.jpg
Step 1
Open a new image, any size is fine. You just need it to activate the menus.
Step 2
Go to Effects>3D Effects>Inner Bevel.
Find the Metallic Setting.
Click the icon to the left of the eyes to close the preview screens. http://nansons-place.com/nontut/8doodles/golden/gold-shot.jpg
Step 3
You need a screen shot of the dialog box.
On your Keyboard press Alt + PrtScn, that will send a copy of the dialog box to your clipboard.
Click Ok to close the dialog box.
Go to Edit>Paste>Paste as New Image. Your dialog box is now Image 2 on your workspace.
http://nansons-place.com/nontut/8doodles/golden/gold-shot2.jpg
Step 4
Go to Layers>Duplicate.
You'll be adding effects to "Copy of Background".
Go to Effects>3D Effects>Inner Bevel.
Apply the Metallic Bevel to your screen shot.
http://nansons-place.com/nontut/8doodles/golden/gold-bevel.jpg
( Shown at 50% )
Step 5
Go to Effects>Artistic Effects>Contours.
Use these settings.
http://nansons-place.com/nontut/8doodles/golden/gold-contours.jpg http://nansons-place.com/nontut/8doodles/golden/gold-contours2.jpg
( Shown at 50% )
Step 6
Go to Effects>Artistic Effects>Glowing Edges.
Use these settings.
http://nansons-place.com/nontut/8doodles/golden/gold-edges.jpg
http://nansons-place.com/nontut/8doodles/golden/gold-edges2.jpg
( Shown at 50% )
Step 7
Go to Effects>Artistic Effects>Chrome.
Use these settings.
http://nansons-place.com/nontut/8doodles/golden/gold-chrome.jpg http://nansons-place.com/nontut/8doodles/golden/gold-chrome2.jpg
( Shown at 50% )
Step 8
Go to Adjust>Color Balance>Black and White Points.
Find the preset Gold Tone. http://nansons-place.com/nontut/8doodles/golden/gold-points.jpg
Step 9
Open your Layer Palette.
Click the small arrow next to normal, go to "Multiply".
http://nansons-place.com/nontut/8doodles/golden/gold-blend.jpg
Step 10
Now it should look pretty good except for the very top. http://nansons-place.com/nontut/8doodles/golden/gold-blend2.jpg
Click on your selection tool.
http://nansons-place.com/nontut/8doodles/golden/select.jpg
Go to your Tool Options Palette.
Set it to Rectangle, Feather 1.
Make a selection over the top section.
http://nansons-place.com/nontut/8doodles/golden/select2.jpg
Change the Mode on the Tool Ribbon to Add.
Make another selection on the blue area below the bar.
http://nansons-place.com/nontut/8doodles/golden/select3.jpg
Note: Set the Mode back to "Replace" when you finish.
If you forget you won't be able to make a selection next time you try.
Step 11
Go to Selections>Promote Selection to Layer.
Go to Selections>Select None.
Go to Layers>Merge>Merge All.
Go to Adjust>Edges>Sharpen>Unsharp Mask.
Experiment with the settings.
This is what I used.
http://nansons-place.com/nontut/8doodles/golden/gold-sharp.jpg http://nansons-place.com/nontut/8doodles/golden/pspgold.jpg
That's it, you're done